KEEP MOVING WITH  
Barnes Home Page
Tire Repair Kits
Tubeless Tire Repair Products
Specialty Kits
About Barnes PSP
Order Barnes Products
BARNES tubeless tire repair products  
tubeless tire repair products  

tubeless tire repair kit

1. finding the puncture FINDING THE PUNCTURE.
Following directions for Leak Seeker, locate leak.
2. reamer tool cleaning puncture FINDING DIRECTION AND CLEANING PUNCTURE.
Using Reamer Tool, gentle push into puncture to find dire tion of injury. Then move reamer in and out to clean hole.
3.

THREADING NEEDLE.
Thread approximately 6" of patented PSP Material thru eye of Injector Tool until ends are even. (Larger repairs may require 2 strands.)
4. apply bonding compound APPLYING BONDING COMPOUND.
Holding both sides of material against needlle, dip into Bonding Compound about 1"
5. insert puncture INSERT INTO PUNCTURE.
Push Injector Tool into injury following direction of puncture with steady pressure leaving 1" of material exposed.
6.

TWIST TOOL AND WITHDRAW.
Twist Injector Tool 1/4 turn clockwise. This ensures good seal. Then, with a steady pull, withdraw tool until end is 1" outside of tire. For larger punctures, repeat steps 3 thru 6 until injury feels tight. DO NOT OVERPACK.
7. check for leaks CHECK FOR LEAKS.
Inflate tire to proper inflation, check repair with Leak Seeker solution.
8. trim excess material from tire TRIM EXCESS MATERIAL.
After testing cut off excess material 1/4" from tire.
HOME | REPAIR KITS | PRODUCTS | SPECIALTY KITS | ABOUT BARNES
ORDER | CONTACT BARNES PSP

BARNES PSP INCORPORATED

P.O. BOX 189 • BUTLER, PA 16003
PHONE: 724-287-6711 • FAX: 724-287-7739
E-MAIL: INFO@BARNESPSP.COM

PERMANENTLY SEALS PUNCTURES